Dimsport Genius V2 + OBD ECU REMAPPING SYSTEM FOR CAR’s, BIKE’s, LCV’s Trasdata Package – WITH 12 MONTHS SUBSCRIPTION

$1,800.00

New Genius is a true asset for every tuner thanks to the impossibility to perform wrong operations. Detailed instructions appear on the screen and drive the tuner until the vehicle is programmed.

About this item

 

Condition: New.
Quantity: 7 sold More than 10 available
OBD Interface: CAN, EOBD, OBD, OBDII
Vehicle Type: Heavy Duty/Commercial, Motorcycle, Passenger Vehicle
Country/Region of Manufacture: Italy
Brand: Dimsport
Manufacturer Part Number:  New Genius
Item Number: 263353973355
Description

Description

Dimsport Genius V2 + OBD ECU REMAPPING SYSTEM FOR CAR’s, BIKE’s, LCV’s Trasdata Package – WITH 12 MONTHS SUBSCRIPTION

New Genius Slave Dimsport (Tools)

 

Product information

New Genius is the stand alone device for the serial communication with the Engine Control Unit (ECU), through the vehicle OBDII socket or via specific diagnostic connectors. It does not require connections to a personal computers or laptop for the management of the serial communication: it has never been so simple and immediate to achieve programming operations of the vehicle stock ECU.

Intuitive operations to maximize the ease of use:
New Genius is a true asset for every tuner thanks to the impossibility to perform wrong operations. Detailed instructions appear on the screen and drive the tuner until the vehicle is programmed.

We have a limited amount of units with 12 Months subscription 

Dimsport Genius + Trasdata Bench Remapping Tool – With EGPT Pinout module

 

 

WHAT’S INCLUDED IN YOUR DIMSPORT PACKAGE

  • Dimsport Genius + Trasdata, the latest OBD and bench tuning kit on the market.
  • Brand new including 18 months subscription for new developments and additional vehicles
  • Universal cables for boot-loader and bench programming ECUs out of the vehicle
  • Full training at our HQ in Sheffield If you have experience you are not required to attend
  • Support via , dedicated Facebook support group, phone, Skype,  email and PC to PC remote assistance if needed
  • Full setup & operating instructions.
  • Free advertising on our website Advice and help with building your website

    The New Trasdata is a unique tool supporting almost all microprocessors used in the automotive field, for reading and programming operations in JTAG, BDM and BOOT mode.

     

    Developed as the evolution of the hugely successful Trasdata predecessor which was known for it’s ease of use and innovation (e.g. Automatic identification of the plugin required, backup copies of the whole ECU firmware etc…) the New Trasdata opens new doors to JTAG communication, which is widely used Asian vehicles.

    A wide range of JTAG developments expands the possibilities of the programmable controllers and of course BDM and BOOT applications are also included. The list of microprocessors now includes:

    Race_NewTrasdata_sx

    • Motorola MPC5xx (BDM mode)
    • Motorola MC68xxx (BDM mode)
    • Motorola MPC55xx (JTAG mode)
    • Renesas SH705x (AUD/BOOT mode)
    • Mitsubishi MH72xx/MH82xx (BOOT mode)
    • Infineon Tricore (BOOT mode)
    • ST Microelectronics ST10xxx (BOOT mode)
    • Motorola HC12 (BDM mode)
    • Renesas M32R (BOOT mode)
    • NBD NEC M32R (Toyota TF010 CPU Group)

    Using the New Trasdata allows you also widen the range of vehicles supported by New Genius via OBDII.

    When the ECU microprocessor is delivered with “anti-tuning/TPROT” protection, a software patch can be applied using New Trasdata which unlocks the OBDII communication and allows programming with New Genius once again.

    Also supported is reading and programming of the whole content of the ECU (microprocessor, flash Eprom and serial Eeprom). A wide variety of operations are therefore supported and after the initial reading, it is always possible to restore the ECU to it’s original state. Automatic checksum correction is performed in the writing operation.

    These operations can be performed without any physical soldering if desired, a wide range of programming adapters are available to allow connection between the New Trasdata and the ECU with our BDM positioning frame.

THE EVOLUTION OF THE OBDII PROGRAMMING!

Dimsport Technology is proud to present the new GENIUS V2, an evolution of the previously released Genius. The first Touch&Map tool for serial reading and programming operations of Engine Control Units (ECUs) has been improved in it’s technical features & performances.

A new more advanced colour touch-screen panel has been integrated and a more powerful microprocessor that allows for faster operations. NEW GENIUS allows intuitive use thanks to it’s touch-screen panel and a really user-friendly operating system.

Reading and programming operations are performed without any connections to a PC to offer the greatest independence and to avoid slowness or blocking tied to an eventual presence of viruses or, in general, effect of the multitasking nature of the computer.

NEW GENIUS represents the perfect tool for top professionals as well as new tuners. A direct interface with the vehicle’s engine via E-OBDII or diagnostic socket. CAN-BUS, K/L-line (KWP), J1850 communication protocols are supported to cover all ranges of Cars, light commercial vehicles and trucks.

A removable 512 Mbyte SD Card (SECURE DIGITAL), upgradeable up to 4 Gbyte, permits the storage of an almost unlimited number of original tuned files. NEW GENIUS is a true asset for every tuner thanks to the impossibility to perform wrong operations. Detailed instructions appear on the screen and drive the tuner until the car is programmed. Thanks to it’s new and advanced technology, it has never been so simple to achieve the modified result which every tuner and every customer wishes to obtain.

Highest safety standards for the most extensive reliability during working process:
before programming the vehicle, New Genius verifies the size of the file and the checksum integrity/congruence.

In addition, should the programming procedure be interrupted (example: connector unplugged), the device would recover the communication and automatically complete it. Several additional features integrate the conventional operations, like the possibility to reset faulty codes tied to the ECU programming, the reading and automatic writing of the injector settings, counters reset, etc. In order to meet and fulfil the assorted inquiries presented by professionals, New Genius has been conceived as a flexible device, configured to support from a single, specific application to the most complete range of vehicles provided with engine control units. Dimsport provides its console with a standard OBDII socket; should this not be available an additional range of dedicated connectors would permit tuning operations via diagnostic socket.

Don’t miss any update! New developments are constantly released to extend the range of vehicles supported: an improvement achieved thanks to the commitment of several groups of technicians and partnerships.
Subscriptions and upgrades to enhance its technical features are performed through quick online updates.
Not just a black box connecting the vehicle OBDII socket to a computer, but an independent device for serial reading and programming, practical and versatile. Why settling for a black box when you can have New Genius instead?