Requirements:
– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1.8 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 15 GB of available space
– DVD-ROM

Original new fully functional LINDE CANBOX III  Bluetooth 7 pin cable included

Basic functions of the Linde Truck Can Box:

Diagnosis – to read memory faults stored in the drivers of vehicles while allowing deleting, saving and printing of error codes to the full description.

Measured values – is called. LiveData or display current data from sensors or actuators registered by the driver.

Identifying Drivers – it displays detailed data such as. The serial number, software version, manufacturer’s numbers, the numbers of character, etc …

Actuator Test in other words starting components are direct tests performed on the elements of such systems. Launch ABS modulators, such as activation of the solenoid valves. Lifting – lowering the vehicle or machine. This part of the diagnostic otherwise known as active allows, for example. In the case of the engine to balance / detachment cylinders which in turn is helpful for example. In the evaluation of compression.

Calibrations are adaptations of the individual elements, eg. The sensors on the needs of the vehicle can be an example of calibration – to adapt the electronic throttle, pedal acceleration sensor active suspension, support systems, etc …

Adjustments / Coding / Programming reconfiguration are all kinds of settings, eg. Off speed limiters, power, torque, activate hidden features, disable the exhaust gas treatment, etc. * (To do some reconfiguration is to have a  conical expansion called optional extras. Developer like. calculators encodings or configuration).

Read / Write driver configuration – this allows you to copy the configuration of drivers during the replacement or repair.Deleting maintenance / inspection service – functions help you review the service intervals (reset service light, oil, mileage, etc.)

All the above features allow for comprehensive diagnosis elements, eg such as:

engine
gearboxes
brake systems
air conditioning systems and heating / reheating
retarder,
active suspension
anti-theft devices
central computer
tachograph
dashboard
air processing, eg., SAC,
heater, dryer, etc.
flue gas treatment
steering eg. EMAS
frame modules
list of available drivers could be replaced, however long it is dependent upon the vehicle diagnosis equipment or machine.

For example, select the appropriate driver. Engine computer can, for example .:

– Read pending diagnostic trouble codes (DTC)

– Read diagnostic trouble codes (DTC)

– Erase codes and turn off the “Check Engine” (MIL)

– The ability to save the read data to a file for later analysis

– Diagnosis of type damper actuator valves, sensors

– Dynamic control of ignition, starter dose,

– Engine speed (RPM)

– Order (Calculated Load Value)

– Coolant temperature (Coolant Temperature)

– The status of the fuel system (Fuel System Status)

– Speed of the vehicle (Vehicle Speed)

– Short-term correction injection time (Short Term Fuel Trim)

– Long-term correction of the injection time (Long Term Fuel Trim)

– Vacuum in the intake manifold (Intake Manifold Pressure)

– Ignition timing (Timing Advance)

– The temperature of the intake air (Intake Air Temperature)

– Air flow – an indication of the flowmeter (Air Flow Rate)

– Throttle position TPS (Throttle Position Absolute)

– Indicate the oxygen sensor (Oxygen Sensor Voltages / associated short term fuel trims)

– Fuel pressure (Fuel Pressure)

– Checking the condition of the engine based on the consumption of individual cylinders – that
difference in fuel doses dispensed by the computer to the individual cylinders.

– Measurement of vehicle parameters – power and acceleration

and many other troubleshooting steps are impossible to comply with universal testers …

324  E12/14/15/16
334  E10
335  E14/16/18/20
336  E20/25/30
337  E35P-02/40P-02/48P-02

 

2. Diesel / LPG truck (V):
350  H12/16/18/20 – 03

 

3. Pallet stacker (L):
379  L10/12-L10/12AS
372  L14/16/L14AP/16AP
141  L12L/L12LP
141  L16AS
139  L 12/16 R, L 12/16 S

 

4. Pallet Truck:
360  T16/T18/T20/T16L
141  T20AP
141  T20/T30
144  T20S/T20SF
140  T20R

 

5. Reach Truck (R):
113  R14/16/16N/20/20N
115(CANBOX)  R14/R16/R20, R10C/R12C/R14C, R14G-03/R16G-03/R20G-03

​

6. Tractor (P):
141  P30/50
126  P 60Z
127  P 250 / W20

Free technical support available by appointment.

All software will be pre-installed for you.
The system is built to order and delivered READY TO USE. 

All cables supplied will be brand new.

TXS Global Store Ltd.

We supply all manner of diagnostics setups

for cars and trucks.

Contact us if you have any queries.

DISCOUNTS FOR CASH/BANK TRANSFER/WIRE PAYMENTS AVAILABLE or MULTI BUY. Contact us.

Delivery:

We will deliver your products as soon as possible after confirming with your payment.
All items had been tested before shipping

please give correct post code to avoid delay of shipment

Russia customer needs to provide full name, normally it have three name

please provide English delivery address

Tax:

We can declare in lower value to help you avoid tax, if you have any idea about this , please tell after paid

buyer is responsible to clear customs and pay tax if any when goods arrive their country,  our price does not include tax in your country,

thanks.

 

Returns:

We do our best to serve our each customer the best that we can.
We will refund you for items returned within 7 days of you receiving them, for any reason.

A full Refund will be given if items are returned in their original condition.
Merchandise which is damaged or missing components is not refundable.
Buyers are responsible for return shipping with proper packaging.
On receiving items, we will refund you immediately.

 

Warranty & Maintenance:
We provide 1 year warranty, Buyers are only responsible for the return shipping fees for warranty items. As soon as we receive the items,

we will repair or exchange them ASAP.

 

Feedback:
Your positive feedback will be highly appreciated once you get the items and satisfied with them. Also we will be very glad to return you the
positive feedback. Thank you!

 

Contact us:

Our office hours:

Am8: 30-PM11: 00

The Leave A you the make the Sure Please the Message for the FAST AT at The Email below the Response or Reply.
And if nobody answers you online, sometimes, do not worry, leave us a message or write your desires, we will contact you as soon as possible. , We Will GET Back to you immediately.
Thanks for your Understanding.

 

Contact Person: Johnson Damus

Email: txsglobalstore@zoho.com / sales@txsglobalstore.com
For WhatsApp Business Chat Only: +44 (777) 4210-234